Summit AT Direct to Garmet Printer

Training Videos and Support Documents

• SUMMIT AT HOME
• SUPPORT: MAINTENANCE▲
  A.M. Maintenance End of Day Maintenance Flushing AT Files
• NAVIGATOR RIP▲
  System Requirements for Navigator RIP Software Setting Up Platen Templates Printing on White Shirts Printing on Black Shirts Printing on Colored Shirts Printing on Inline Black Shirts Printing on Inline Color Shirts
• SUPPORT: TROUBLESHOOTING▲
  Truncated Printing Paper Jam White Ink Flow Problems
• ADDITIONAL RESOURCES▲
  Suppliers and Helpful Info Contact Support

Mandatory Morning Maintenance

Printable PDF

1. Power your machine on and bring it to the load guide screen.
   
2. Using your syringe, pull about 25ml of ink from the waste ink line. The waste ink should be a dark gray/green color. Then empty any waste ink from waste tank. Then reinsert the line into the waste tank.
   
3. Tap the Setup icon
   
4. Tap the Maintenance icon
   
5. Tap the Print Head Cleaning icon
   
6. Tap the Head Cleaning icon. Allow cycle to complete then tap Done. If necessary, repeat process.
   

Share this page: